{"id":2045,"date":"2015-08-18T07:45:05","date_gmt":"2015-08-18T07:45:05","guid":{"rendered":"http:\/\/claitec.com\/?p=2045"},"modified":"2017-02-07T11:38:13","modified_gmt":"2017-02-07T11:38:13","slug":"how-to-make-sure-that-the-tag-works-properly","status":"publish","type":"post","link":"https:\/\/claitec.com\/en\/how-to-make-sure-that-the-tag-works-properly\/","title":{"rendered":"How to make sure that the t-10 tag works properly"},"content":{"rendered":"

By checking the tags on the AV-50 antenna, we are able to verify that each person\u2019s T-10 tag is in perfect working condition before entering the protected area.<\/p>\n

\"Asegurar<\/a><\/p>\n

1. Verification register Software.<\/strong><\/p>\n

2. AV-50 Antenna (LF antennas and HF included)<\/strong><\/p>\n

3. Personnel with Tag.<\/strong><\/p>\n

 <\/p>\n

 <\/p>\n

As the Tag approaches the verification antenna 4 things happen:<\/p>\n

 <\/p>\n

1. It checks the condition of the tag\u2019s battery.<\/strong><\/p>\n

The T-10 Tag communicates the state of charge (voltage) of the battery to the antenna\u2019s verification system.<\/p>\n

If the value is below 2.90V the AV-50 antenna shows a red light and beeps to alert the person that the battery\u2019s tag is running out.<\/p>\n

 <\/p>\n

When a battery below 2.90V is detected for the first time or if it is at a 30% charge, the tag has sufficient autonomy to operate under normal conditions and fully functionally for 3 days.<\/p>\n

 <\/p>\n

2. It checks the LF communication.<\/strong><\/p>\n

The verification system of the AV-50 antenna emits a detection field.<\/p>\n

When a tag is close to the antenna, it awakens, it checks the charge of the battery and it informs the AV-50.<\/p>\n

 <\/p>\n

3. It checks the HF communication.<\/strong><\/p>\n

The AV-50 antenna receives the voltage of the battery through the HF. The AV-50 checks the battery\u2019s condition and it makes a decision according to the state of the tag – if it has sufficient charge, nothing occurs, but if the battery needs replacing, it raises an alarm.<\/p>\n

 <\/p>\n

4. It records the result of the analysis.<\/strong><\/p>\n

During each battery analysis and software usage, the system registers the result of the analysis.
\nBy registering date and time, you can keep track of whether the T-10 tags are properly verified and whether there is a tag that needs to have its battery replaced.<\/p>\n

 <\/p>\n

The following are some Questions and Answer to consider if the test unit lights up in red:<\/p>\n