pCall us: +34 972 183 225

June – International Environment Month – is coming to an end. At Claitec, we would like to take this opportunity to highlight the key role that environmental factors play in our overall business strategy and in the design of all our industrial safety systems.

Caring for the environment, respecting nature, and the development of a sustainable environment must be concerns we all take into account in our workplaces. Technology is a powerful tool which – when applied appropriately – can help us become more efficient and considerably reduce our environmental impact.

All Claitec’s processes are carried out under the ISO 9001: 2015 and ISO 14001: 2015 quality and environment certifications, reinforcing the importance environmental concerns play in our philosophy, designs, development and commercialization of safety systems for the protection of people, and always seeking to improve our processes and add value to customers.

We are 100% committed to caring for the environment and we cannot conceive a solution if it is not truly responsible towards the environment, and without generating a sustainability plan for that system in relation to its manufacture, its use, and its subsequent disposal. This is how we approach suppliers, clients, and the general public.

In addition, we feel every industry must have its own environmental management and responsibility plan, and as such, we invite you to be as environmentally aware as possible and start taking action!

Should you need more information on how to improve your levels of occupational safety, please don’t hesitate to get in touch.

The team at Claitec is here to help you.

In our continuous search for new and innovative ways to provide helpful solutions for our customers, the team at Claitec has developed a very practical multifunction tag that replaces and unites the tasks performed by other products in one single unit.

Introducing the MT-50 – a new device capable of performing the same functions of the TT-50, TZ-TAG, TZ2-TAG (BI / UNI). This new tag does the same job as all these other devices while also adding power, RF and LF improvements typical of a T -10R, among other things.

The MT-50 can easily be configured using a simple switch to perform the test tag functions which, until now were carried out by the TT-50 – a device designed to oversee the correct functioning of both the RF communications as well as the safety zone generated by the AC-50 Activator.

The MT-50 also performs the tasks of the TZ-Tag – a small device that allows us to detect any forklift equipped with an AC-50 in an established safety zone. Thanks to these devices, a safety area can be delimited in a physical space without needing anyone with the T-10 keyring to be present. This way, when a forklift enters that safety area, the AC-50 triggers an alarm signal on the vehicle, and it even limits its speed.

In addition to the above, the MT-50 also includes the same capabilities of the bidirectional and unidirectional TZ2-TAG designed to detect a forklift equipped with an AC-50 in a safety zone. Thanks to these devices it is possible to delimit a safety perimeter in a physical space without needing anyone with the T-10 keyring to be present. When a forklift enters the safety area, the TZ2-TAG will activate a relay.

Advantages of the MT-50 Tag:

The new tag presents many advantages when compared to its predecessors, including:

  • Better detection
  • Greater range (going from 5m to 7m in LF -21KHz-)
  • Better communication at HF ​​(2.4GHz). This means that it is a lot easier to detect in places where the TZ2-tag and the TZ-TAG were difficult to detect
  • It is connected through an IP65 connector
  • It is easier to install
  • It incorporates a relay
  • It can be expanded with additional outputs and inputs
  • The configuration of the TZ2 and TT-50 function is easily done through switch

Are you keen to find out more about this solution?

Do you need advice on any of our products?

Don’t hesitate to contact us.