pCall us: +34 972 183 225

The MT-50: A modern and multifunctional tag

In our continuous search for new and innovative ways to provide helpful solutions for our customers, the team at Claitec has developed a very practical multifunction tag that replaces and unites the tasks performed by other products in one single unit.

Introducing the MT-50 – a new device capable of performing the same functions of the TT-50, TZ-TAG, TZ2-TAG (BI / UNI). This new tag does the same job as all these other devices while also adding power, RF and LF improvements typical of a T -10R, among other things.

The MT-50 can easily be configured using a simple switch to perform the test tag functions which, until now were carried out by the TT-50 – a device designed to oversee the correct functioning of both the RF communications as well as the safety zone generated by the AC-50 Activator.

The MT-50 also performs the tasks of the TZ-Tag – a small device that allows us to detect any forklift equipped with an AC-50 in an established safety zone. Thanks to these devices, a safety area can be delimited in a physical space without needing anyone with the T-10 keyring to be present. This way, when a forklift enters that safety area, the AC-50 triggers an alarm signal on the vehicle, and it even limits its speed.

In addition to the above, the MT-50 also includes the same capabilities of the bidirectional and unidirectional TZ2-TAG designed to detect a forklift equipped with an AC-50 in a safety zone. Thanks to these devices it is possible to delimit a safety perimeter in a physical space without needing anyone with the T-10 keyring to be present. When a forklift enters the safety area, the TZ2-TAG will activate a relay.

Advantages of the MT-50 Tag:

The new tag presents many advantages when compared to its predecessors, including:

  • Better detection
  • Greater range (going from 5m to 7m in LF -21KHz-)
  • Better communication at HF ​​(2.4GHz). This means that it is a lot easier to detect in places where the TZ2-tag and the TZ-TAG were difficult to detect
  • It is connected through an IP65 connector
  • It is easier to install
  • It incorporates a relay
  • It can be expanded with additional outputs and inputs
  • The configuration of the TZ2 and TT-50 function is easily done through switch

Are you keen to find out more about this solution?

Do you need advice on any of our products?

Don’t hesitate to contact us.

Sorry, the comment form is closed at this time.