In our continuous search for new and innovative ways to provide helpful solutions for our customers, the team at Claitec has developed a very practical multifunction tag that replaces and unites the tasks performed by other products in one single unit.

Introducing the MT-50 – a new device capable of performing the same functions of the TT-50, TZ-TAG, TZ2-TAG (BI / UNI). This new tag does the same job as all these other devices while also adding power, RF and LF improvements typical of a T -10R, among other things.

The MT-50 can easily be configured using a simple switch to perform the test tag functions which, until now were carried out by the TT-50 – a device designed to oversee the correct functioning of both the RF communications as well as the safety zone generated by the AC-50 Activator.

The MT-50 also performs the tasks of the TZ-Tag – a small device that allows us to detect any forklift equipped with an AC-50 in an established safety zone. Thanks to these devices, a safety area can be delimited in a physical space without needing anyone with the T-10 keyring to be present. This way, when a forklift enters that safety area, the AC-50 triggers an alarm signal on the vehicle, and it even limits its speed.

In addition to the above, the MT-50 also includes the same capabilities of the bidirectional and unidirectional TZ2-TAG designed to detect a forklift equipped with an AC-50 in a safety zone. Thanks to these devices it is possible to delimit a safety perimeter in a physical space without needing anyone with the T-10 keyring to be present. When a forklift enters the safety area, the TZ2-TAG will activate a relay.

Advantages of the MT-50 Tag:

The new tag presents many advantages when compared to its predecessors, including:

• Better detection
• Greater range (going from 5m to 7m in LF -21KHz-)
• Better communication at HF ​​(2.4GHz). This means that it is a lot easier to detect in places where the TZ2-tag and the TZ-TAG were difficult to detect
• It is connected through an IP65 connector
• It is easier to install
• It incorporates a relay
• It can be expanded with additional outputs and inputs
• The configuration of the TZ2 and TT-50 function is easily done through switch
  
  

Are you keen to find out more about this solution?

Do you need advice on any of our products?

Don’t hesitate to contact us.

Today we’d like to introduce you to the new Radar Crossing Guard, a device used in conjunction with the Crossing Guard, a system installed at higher levels in warehouses to prevent collisions at intersections.

This solution now incorporates a new “radar” movement detector which guarantees optimal traffic flow at industrial crossings thanks to the reliable and intelligent activation of the Crossing Guard system.

The radar installed in the system can detect any moving object, and it’s even capable of differentiating between vehicles and people. The detection direction can be configured as desired, as well as whether vehicles or pedestrians are approaching, moving away or moving in both directions.

In addition, the Radar Crossing Guard has two fully independent programmable outputs offering complete flexibility in any application. An output boost function makes it an even more versatile solution.

The Radar Crossing Guard is extremely intuitive and very easy to program.

Our clients are also very pleased about how easy it is to combine with other Claitec’s solutions like the VAS Projector at intersections. In this case, when the radar detects a forklift or a person, it projects a signal on the ground at the intersection alerting of a potential risk or indicating the vehicle to “stop”.

Similarly, the radar is also present in the Crossing Guard, combining radars with traffic lights, projectors and bluespots. In this case, it depends on whether the radar detects a person or a machine, or whether it turns on traffic lights or projects a signal on the ground.

Should you be interested in finding out more about our range of industrial safety solutions, please do not hesitate to contact us, we are here to help!